Product Details:
|
Appearance: | White Or Yellowish Particles And Powders | Moisture Content: | ≤10.0% |
---|---|---|---|
Residue: | ≤10.0% | Insoluble Matter: | ≤0.5% |
Viscosity: | ≥60.0mPa·s | Dissolution Time: | ≤20.0min |
Storage Modulus: | ≥2.0pa | Loss Modulus: | ≥0.3pa |
Highlight: | Strong Cracking Fracking Thickener,Fracking Fluid Chemicals BCG-1A,Strong Cracking Fracking Fluid Chemicals |
This product is a polymer with super-strong intermolecular self-association ability, which is copolymerized from acrylamide and various functional monomers. In a proton environment with a concentration of HCl as high as 20% (w/w), it still has a strong ability to rapidly increase viscosity and form viscoelastic colloids. The colloid has stable performance at a temperature of 120°C, low pipeline friction, strong cracking ability, strong sand-carrying ability, no polymer residue in residual acid, low content of inorganic salt precipitation, little damage to fracture conductivity, and no bacterial invasion , easy to use, suitable for acidizing and acid fracturing reconstruction of low permeability oil and gas reservoirs.
1. dosage:0.6% ~ 1.5%;or according to the needs of the formation condition.
2 .usage:According to the designed thickened acid component percentage (w/v), add acid solutions containing different concentrations of HCl into the liquid distribution tank. Choose pipelines, jet guns and pumps that are resistant to 20% HCl. Turn on the pump until sufficient negative pressure is formed and start slowly inhaling the agent with a hose. The specific inhalation speed is subject to no agglomeration and no fish eyes. Maintain the stirring state for about 20 minutes, the apparent viscosity of the solution will increase greatly, and the liquid can be used as acidified acid-pressed thickened acid after standing still for 4 hours.
1 Use the 25kg paper plastic bag as the product packaging. Store in cool and dry place, Quality guarantee period:48months;
2 Transport as non-dangerous Article, prevent sun and rain ;
3 Should be stored in a cool, ventilated and dry warehouse;
4 Do not store together with oil substances;
5 Keep away from fire and heat source;
6 should be stacked 20cm from the ground and 20cm from the wall.
Company Service:
Our professional technical service team has been engaged in reservoir transformation, oilfield chemical additives research and technical services for a long time, and has rich experience in low to high temperature fracturing fluid research, deep well fracturing, foam fracturing, unconventional reservoir transformation, and thickened acid.
Since 2000, the team has been working on next-generation fracturing fluids and has achieved new results. In 2005, the experimental construction was carried out with phased results, and good stimulation effect was achieved.
At present, this new fracturing fluid is being continuously developed and upgraded, and the technical indicators are rapidly improved.
Contact Person: Liu
Tel: 13982188556
Fax: 86-28-83032595