Product Details:
|
Apperance: | White Or Yellowish Particles And Powders | Moisture Content: | ≤10.0% |
---|---|---|---|
Dissolution Time: | ≤15.0min | Insoluble Matter: | ≤0.3% |
Viscosity: | ≥70.0mPa·s | Temperature Performance: | ≥165℃ |
Highlight: | Weighted Fracking Fluid Chemicals,Weighted Fracking Fluid Thickener,Reduction Performance Fracking Fluid Chemicals |
This product can be used as a thickening agent for heavy clean fracturing fluids. The fracturing fluid has good viscoelasticity, which can significantly improve fracturing construction and fracturing effect, and increase reservoir productivity.
This product can be mixed with water to obtain a good viscoelastic fracturing fluid, adding inorganic salts can be added to meet the deep well and ultra-deep well reservoir reconstruction tasks.
Its advantages are as follows: residue free, high temperature and shear resistance, fine resistance reduction performance.
Operating guide
1. dosage:0.2% ~ 0.6%(w/v);or according to the needs of the formation condition.
2 .usage:Add water to the liquid mixing tank, and the jet gun inhaled the fracturing fluid thickener ( should be inhaled slowly, and better not to agglomerate or form fish eyes);After the thickener is added, stir for 20min, and the liquid should be stationary for 2 hours.
1 Use the paper plastic bag as the product packaging. Store in cool and dry place, Quality guarantee period:24 months;
2 Transport as non-dangerous Article, prevent sun and rain ;
3 Should be stored in a cool, ventilated and dry warehouse;
4 Do not store together with oil substances and ban hook;
5 Keep away from oil and heat source;
6 should be stacked 20cm from the ground and 20cm from the wall.
Company Service:
Our professional technical service team has been engaged in reservoir transformation, oilfield chemical additives research and technical services for a long time, and has rich experience in low to high temperature fracturing fluid research, deep well fracturing, foam fracturing, unconventional reservoir transformation, and thickened acid.
Since 2000, the team has been working on next-generation fracturing fluids and has achieved new results. In 2005, the experimental construction was carried out with phased results, and good stimulation effect was achieved.
At present, this new fracturing fluid is being continuously developed and upgraded, and the technical indicators are rapidly improved.
Contact Person: Liu
Tel: 13982188556
Fax: 86-28-83032595