SWA-1 Fracking Thickening Agent For Seawater Based Residue-Free Fracturing Fluids

Thickener for Seawater - Based Residue-Free Fracturing Fluids SWA-1

Application

      The product can be used as a thickener for seawater based fracturing fluid. The fracturing fluid has good viscoelasticity, which can significantly improve the fracturing construction and fracturing effect, and increase the reservoir productivity.

      The product can be mixed with seawater to get a good viscoelastic fracturing fluid, which can be weighted by adding inorganic salts to achieve the task of reservoir stimulation in deep and ultra-deep Wells. Its advantages are as follows: residue free, high temperature and shear resistance, and fine resistance reduction performance.

Operating guide

1. dosage:0.2% ~ 0.6%(w/v);or according to the needs of the formation condition.

2 .usage:Add water to the liquid mixing tank, and the jet gun inhaled the fracturing fluid thickener ( should be inhaled slowly, and better not to agglomerate or form fish eyes);After the thickener is added, stir for 20min, and the liquid should be stationary for 2 hours.

Notices

1 Use the paper plastic bag as the product packaging. Store in cool and dry place, Quality guarantee period:24 months;

2 Transport as non-dangerous Article, prevent sun and rain ;

3 Should be stored in a cool, ventilated and dry warehouse;

4 Do not store together with oil substances and ban hook;

5 Keep away from oil and heat source;

6 should be stacked 20cm from the ground and 20cm from the wall.